Light Bars
Accent Lighting

RGB Light Bars and SEG Modules

Updated: August 22, 2005

Combined Remote Control and DMX-512 I/F £99GBP!

Our new Infrared remote control combined with DMX-512 Driver, gives total flexibility and ease of use. Control simple colour mixing and fading/dimming functions across 3 channels by just using the remote control unit and driver board. Then if you want to perform more complex chase patterns, colour sequencing or timing functions, just add a DMX-512 controller. Fully compatible with all our RGB light bars, light tubes and RGB SEG modules. Drive up to 32 light bars/tubes or 80 RGB SEG modules from a single driver, to control additional bars, tubes or modules just add a repeaters!

Download Remote Control DMX-512 I/F Spec Sheet

NEW! Truly controllable RGB colour for all types of application. Our RGB Light bar kits allow you to produce the desired colours you want. Mix them, blend them and create all types of effect such as blending, chasing, flashing, static etc. Using the powerful controller you can edit, combine, store, time and assign different sequences to different buttons, as well as save and recall them.

The RGB light bars and tubes use superflux or surfacemount super bight wide angle dispersion leds, creating a whole controllable spectrum of very bright colours. Each RGB light bar is 305mm long by 35mm wide, and comprises a total of 48 leds (16 Red, 16 Green, 16 Blue) (S48).

S48 RGB Light Bar

Applications include accent lighting, concealed constructional coving and skirting lights. Use in kitchen, office or any room for unique accent lighting design hi-lights.
L.E.D Light bars have many advantages, including up to 80 percent energy saving (very low power consumption). Longer life span (up to 50,000 hrs). Led light bars also have the advantage that they can be linked, making them suitable for all types of application. The possibilities are endless.

S48 RGB - Dramatic Accent Lighting

Installation is straight forward, and light bars are linked together with simple push on connectors (one supplied per light bar). The Light bars themselves operate form a 24 Volt dc power supply, and can be mounted using the holes on the circuit board of the light bar, using insulated pillars, screws or other mounting system. RGB Light Bars can be linked to maximum 6 bars in series, and serial strings can be run in parallel from a single or multiple power source, Allowing a large amount of light bars to be used and operated form one controller.

RGB Cove and ceiling LED lighting

RGB SEG Modules

Download SEG Module Spec Sheet

NEW! Truly controllable RGB colour for all types of application. Our RGB SEG modules allow you to produce the desired colours you want. Mix them, blend them and create all types of effects such as blending, chasing, flashing, static etc. Using the Infrared Remote control and/or DMX-512 Driver and controller. You can edit, combine, store, time and assign different sequences to different buttons, as well as save and recall them.

The RGB SEG modules use superflux super bight wide angle dispersion leds, creating a whole controllable spectrum of very bright colours. SEG modules are available in 3 RGB or 6 RGB led versions.

Applications include accent lighting, concealed constructional coving and skirting lights. Use in kitchen, office or any room for unique accent lighting design hi-lights.
L.E.D Light bars have many advantages, including up to 80 percent energy saving (very low power consumption). Longer life span (up to 50,000 hrs). SEG modules also have the advantage that they are linked, making them suitable for all types of application. The possibilities are endless.

Installation is straight forward. The SEG modules are linked together then stuck to the required surface, it's as simple as that! Modules operate from a 24 Volt dc power supply. SEG modules are water proof IP67 rated so can be used indoor or outdoor.

RGB Light Bar Application Example

DOWNLOAD RGB EXAMPLE MOVIE (wmv)

Download DMX Controller Information

Each Kit comprises of 1 x DMX controller, 1 x DMX driver board, all connection cables and PSU (excluding Light Bar PSU), user guide and installation manual. Just add the amount of RGB Light Bars required.**

Download DMX Controller User Guide

If you don't understand something, please feel free to e-mail us at info@3dzled.com or telephone us on 01249 821491.

Now just add your Light Bars, tubes or SEGand Power supply....

Don't understand? Then let us configure it for you, we'll let you know exactly what you need to cover the area you wish to illuminate. Please feel free to e-mail us at info@3dzled.com or telephone us on 01249 821491.